Primera Brave se , refill

August 9, 2018, 6:01 am

≫ Next: Primera Bravo SE ..

≪ Previous: The number of mfrs of aftermarket desktop inks keeps dropping

$

0

0

Hi Guys , Im new to this ink filling , but hav edone some , i have a Primera Bravo se. and have filled the black as i had quite a lot of disks to print black , it worked ok ......... by drilling a hole in the top of the cart and at the near end as you face ur printer but . there is 4 ink pots and it makes its own black , but as i said it worked ok but im wondering am i going in the right place > thanks again , by the way no need to reset the strip

Webman

---

Primera Bravo SE ..

August 9, 2018, 1:48 pm

≫ Next: Pigment Ink Fading - Aardenburg Test Results

≪ Previous: Primera Brave se , refill

$

0

0

Hi all, Really hope someone can help me here, I have a Bravo SE printer & using the 53332 cartridge, But there are so expensive to replace.. I had one ink & I let it run lower then 10% about 6% and tried to refill it, But it still never worked. After reading somewhere on this forum that if it drop below 10% it blows a fuse and cart use ..

So I got another cartridge its gone to level 48% so I thought I will refill the ink before I forget.. But its still new renewed it self .. What else can I...

Primera Bravo SE ..

Pigment Ink Fading - Aardenburg Test Results

August 10, 2018, 11:12 pm

≫ Next: Microboards PF2 Ink Help

≪ Previous: Primera Bravo SE ..

$

0

0

Aardenburg testing has published a report about the fading stability of the Canon Lucia and Epson K3 and the newer HD inks with these results :
Canon Lucia inks perform the best, and the Epson HD inks perform much better than the previous generation K3 inks.
http://www.aardenburg-imaging.com/compare-k3-hd-ex-ink-sets/
(You would need to register as a member (for free) to access the database with hundreds of more tests)
These are tests with the genuine Canon and Epson inks, an...

Pigment Ink Fading - Aardenburg Test Results

Microboards PF2 Ink Help

August 10, 2018, 11:17 pm

≫ Next: Fastest Wireless Printer - Recommendations?

≪ Previous: Pigment Ink Fading - Aardenburg Test Results

$

0

0

Hi all, Does anyone have any idea about this printer.. I have a cart & refilled it .. It Printed once but now the ink light just keep flashing but wont do anything else, Even from the driver.

They are HP 78 cart's but have a IFRD on them so you have to buy the PRF38ml,

Someone told me you can remove the IFRD from the printer and can use the HP78 ink but I don't know how to,

Is it worth me buying a new PRF38ml & see if I can use this and see if it will unlock the refilled in ?

Fastest Wireless Printer - Recommendations?

August 15, 2018, 3:12 am

≫ Next: Mounting a photo to a piece of painted MDF and covering

≪ Previous: Microboards PF2 Ink Help

$

0

0

Hello all! I have a unique use case that I am trying to solve for:

I have a web-based program that identifies a Hotel Guest from a list when they drive up to a security gate for a Hotel property. When the Guest is selected in the program using a mobile device, there is an email alert that gets sent out to the front desk employees at the main property that this specific Guest has arrived. However, I would also like to be able to have that email sent to a wireless printer at the security gate...

Fastest Wireless Printer - Recommendations?

Mounting a photo to a piece of painted MDF and covering

August 21, 2018, 11:39 am

≫ Next: Drying time for black and white prints

≪ Previous: Fastest Wireless Printer - Recommendations?

$

0

0

I want to attach a photo to a piece of MDF. The MDF is cut and routered and painted with semigloss white.

I would also like to coat or cover it somehow so dust can be wiped off.

I would like it to look nice and semi loss or flat.

Any suggestions?

So far I have come up with Scotch Super77
Thanks!

Drying time for black and white prints

August 23, 2018, 12:44 pm

≫ Next: Canon Pro-10 or Epson P400 or ET-7500

≪ Previous: Mounting a photo to a piece of painted MDF and covering

$

0

0

I searched for this topic to no avail so ..... I'm aware of opinions/facts that suggest at least 24 hours drying time for most prints. How about for 13x19 b&w matte prints using dye inks. My b&w prints consist of large areas of pure black. I have been laying them out to dry for a day or so and then adding them to a boxed stack of previous prints - lets say 50 to a box. Should I inter-leaf with thin sheets of acid-free paper? (This one got me thinking about paper texture transference onto the...

Drying time for black and white prints

Canon Pro-10 or Epson P400 or ET-7500

August 26, 2018, 11:00 pm

≫ Next: Ricoh GX e5550N automatic cleaning problem

≪ Previous: Drying time for black and white prints

$

0

0

My Epson XP-950 factory refurbished printer finally died on me so I need to get a replacement. I think I narrowed it down between the Canon Pro-10, Epson P400 and Epson ET-7750. Can I have advice which one would be best for me. Below is a list of priorities in order of importance. I know all these three printers will have a print quality I'm happy with. I'm open to suggestions outside of these 3 but these hit the price range I'm looking in.

I am an amateur photographer with a Sony...

Canon Pro-10 or Epson P400 or ET-7500

---

Ricoh GX e5550N automatic cleaning problem

August 29, 2018, 5:10 am

≫ Next: Did I just refill my printer as instructed by the OEM ?

≪ Previous: Canon Pro-10 or Epson P400 or ET-7500

$

0

0

Hi there,
is there a special trick to reduce these automatic cleaning procedures? One time in Mai 2018 I didn't switch this printer on a long time and he did a limitless automatic cleaning procedure (I switched if off, otherwise he would empty all my cartridges even more, I got 50% less or so). I wrote down the percentages and can ensure he really cleans too much in my opinion.

Best regards,
furziger

Did I just refill my printer as instructed by the OEM ?

September 2, 2018, 10:24 am

≫ Next: Colours Wrong? Inconsistend colour balance? Refillable tank/cartridge?

≪ Previous: Ricoh GX e5550N automatic cleaning problem

$

0

0

My first inkjet was a Canon BJ10ex. An amazing portable printer that used a spiral shaft to both support and move the printhead. Printing a single page cost a large amount of money though, so I would only print what was absolutely necessary. One day I read a magazine article which suggested that I could refill this printer with pen ink and alcohol. It worked, and I started printing a lot, both important and silly stuff, until the printer broke.

Some years later, I bought an HP2000C for my...

Did I just refill my printer as instructed by the OEM ?

Colours Wrong? Inconsistend colour balance? Refillable tank/cartridge?

September 25, 2018, 2:43 am

≫ Next: Printer for A3 transparencies?

≪ Previous: Did I just refill my printer as instructed by the OEM ?

$

0

0

Post moved to "Everything else Inkjet related".

Moderator, please remove this thread as I placed it in the wrong section in error and cannot delete it! Thank you.


We got it covered...Moderator..

Printer for A3 transparencies?

October 29, 2018, 8:07 am

≫ Next: Inkjet prints water resistance tests

≪ Previous: Colours Wrong? Inconsistend colour balance? Refillable tank/cartridge?

$

0

0

My HP officejet 7500A MFP just keeled over and I need to replace it. My main task is printing A3+ transparency sheets. I am using a special paper and pigment ink will not work. It must be dye ink. I can't seem to find an off the shelf A3 printer that uses dye inks !! the all seem to use pigment inks now. I must be going mad. I'll consider anything... I'm getting desperate!!

Is there an A3 printer out there that will can print using dye inks?

Just for info:
My paper media is the type...

Printer for A3 transparencies?

Inkjet prints water resistance tests

October 30, 2018, 10:59 am

≫ Next: Would you use compatible ink cartridges or refills?

≪ Previous: Printer for A3 transparencies?

$

0

0

Results for inkjet prints water resistance tests

nsfw

https://danieldteolijrarchivalcollection.wordpress.com/2018/10/03/inkjet-water-damage-tests/

Would you use compatible ink cartridges or refills?

November 2, 2018, 5:30 am

≫ Next: Printer for Büchi B-545

≪ Previous: Inkjet prints water resistance tests

$

0

0

This may be an ancient concern among printer users/buyers but I'm nevertheless raising it again just to know your two cents.

As we're all aware, genuine printer cartridges are very expensive. Unless you have a stable income stream that allows you to allocate budget into buying original cartridges as soon as they run their course, cartridge expenses can be crippling in the long run.

No wonder people prefer to purchase ink refills or compatible ink packs because they get about the same level...

Would you use compatible ink cartridges or refills?

Printer for Büchi B-545

December 17, 2018, 6:27 am

≫ Next: Finally, an article that's "reasonably" accurate

≪ Previous: Would you use compatible ink cartridges or refills?

$

0

0

Hello,

We have a Büchi B-545 melting point apparatus that is connected to a Star Leer Model: SP500 Series printer with a parallel cable.
The problem is that the printer writes a lot of gibberish instead of typing what it should be. We have checked the printer settings on the Büchi B-545 device.
I have to admit that my knowledge of the above hardware is very limited.
Can the printer be malfunctioning and should we buy a another printer? Does the printer have to support a specific printer...

Printer for Büchi B-545

---

Finally, an article that's "reasonably" accurate

January 1, 2019, 1:39 am

≫ Next: Printer purchase help

≪ Previous: Printer for Büchi B-545

$

0

0

About home printing...

https://www.dealnews.com/features/Are-Printers-Still-Necessary-in-2019/2208539.html

BTW,

Happy New Year!!!

Printer purchase help

January 8, 2019, 3:03 pm

≫ Next: Cleaning solution: the ultimate test

≪ Previous: Finally, an article that's "reasonably" accurate

$

0

0

Hi guys and gals

I am hoping you can help me. I currently need a new printer and I have been looking for a couple of hours. My eyes are rolling back in my head and they are all looking the same lol. I do not handle multiple choices of any product well and need a little advice . I have always been an Epson gal but I am not married to it. My most recent printer was an Epson stylus photo 500 my sister gave me when she upgraded. I love the slides and negative film copy/scan feature it has. I...

Printer purchase help

Cleaning solution: the ultimate test

January 21, 2019, 1:06 pm

≫ Next: Legacy Inks : How to proceed?

≪ Previous: Printer purchase help

$

0

0

Many forum members have enjoyed my formula to condition the sponge of Canon cartridges.

The formula is as follows:

-3 ml propylene glycol (or 2 % glycerol)
-20 ml isopropylalcohol
-distilled water up to 100 ml

The cleaning solution to free up clogged printheads is by adding 20-25 drops of concentrated ammonia to each 100 ml of cleaning solution.

Today I suffered from a tenacious clog in my Epson Pro 3800 in the magenta and cyan channel, caused probably by long term of non-usage and the...

Cleaning solution: the ultimate test

Legacy Inks : How to proceed?

January 30, 2019, 1:55 pm

≫ Next: Precisioncolors Shipping Issues Explained....

≪ Previous: Cleaning solution: the ultimate test

$

0

0

This is something of a commercial post of sorts but bear with me as I'm trying to avoid a sales pitch (as I hope will become apparent).

We've just had a substantial clearout of ink stock for inks that are what I'd now call "legacy" items such as inks for the i9900, iP4200, etc... Some of them are still very much active to a degree but looking at sales and the stock we've pulled from the shelves, it's become apparent that the current stock & pray approach isn't working as it's...

Legacy Inks : How to proceed?

Precisioncolors Shipping Issues Explained....

January 31, 2019, 11:40 am

≫ Next: Empty HP 932/933 cartridge ?

≪ Previous: Legacy Inks : How to proceed?

$

0

0

The cut has come not because of sellers but because sellers are always the place to point to when international shipping goes bad. I've been shipping internationally for over 15 years and I have stopped and restarted before until I had to take the decision to stop again because it was fraught with high risks and costs. Returned packages mailing costs are NOT refunded by the shipping companies and some charge to collect returns.
Furthermore, the purchasers might have been on holidays not...

Precisioncolors Shipping Issues Explained....